Colorbond Double Gate 1.8m (H)
All Gate Components to make a Double Gate up to 3.1m long and 1.8m High.
Gates
Colorbond gates with lattice inserts
The matching gate for a lattice-top fence: Colorbond sheet below, a 300 mm frame of diamond-stamped steel lattice above.
Lattice-top gates are built on the same welded frame as our plain Colorbond gates, with a fourth rail and a 300 mm steel lattice insert. Single gates go up to 1.5 m wide and double gates to 3.1 m, on 1.5 m and 1.8 m high gates.
The lattice, frame and sheets can each be a different colour – the red-framed Primrose gate with lattice pictured above is a good example – at no extra cost. All gates come with a D-latch; doubles add a drop bolt.
Lattice gates match lattice-insert fences and fences with a lattice height extension.
Lattice-top gates we have built
Colorbond gate kits – ask for a lattice top (supply only)
Colorbond Double Gate 2.1m (H)
All Gate Components to make a Double Gate up to 3.1m long and 2.1m High.
Colorbond Double Gate Kit
Complete Colorbond Double Gate Kit - Bag of Screws Included.
Colorbond Single Gate Kit
Complete Colorbond Single Gate Kit - Bag of Screws Included.
Colorbond Single Gate 2.1m (H)
All Gate Components to make a Single Gate up to 1.5m long and 2.1m High.
Common questions
Can I get a lattice top on a 2.1 m gate?
Lattice, louvre and slat tops are available on 1.5 m and 1.8 m high gates. For taller openings we recommend a plain 2.1 m gate or a fence-height extension on the gate frame – ask us.
Is the lattice timber?
No – it is diamond-stamped Colorbond steel, colour matched, so it will not rot or warp.
Enquire about colorbond gate with lattice top
Add a few details and Jye will reply with a preliminary price or arrange a free site inspection.
- 1 What you need
- 2 Details
- 3 Photos
- 4 Contact
- 5 Review
Ready for a free quote?
Send us your fence length, height and a couple of photos and Jye will come back to you with a preliminary price or arrange a free site inspection.